Cabinet wardrobe door board display rack

For the display of small panels, only L rods are needed. Both the upper and lower parts are fixed on the wall with L rods as the force-bearing structure for flipping pages up and down. The most commonly used cabinet wardrobe door panel size is 400x300mm. The angle code can be installed on the door panel by tapping screws, and the door panel samples can be installed and removed up and down. Flipping and disassembling for viewing are very flexible, convenient and practical.

As shown in the figure, L+凸 rods can be directly installed on a flat wall for door panel display, or they can be installed and fixed with square tube ceiling and bottom plate as the upper and lower bearing structure of the flipping board. It can be seen that the display effect of the top and bottom installation in an enclosed space in the right picture is also very beautiful. The angled installation can create a staggered display effect between each door panel.

The hardware structure of the cabinet door panel sample display rack, the L+凸 structure combination is installed on the wall or the square tube structure combination is installed on the ceiling and the bottom plate to display various furniture panels.

If you want to display the wardrobe door panel material samples for opening and closing doors, they will be higher and heavier than small door panel samples. You need to use the upper L rod + lower 凸 rod with nailing to the wall for fixed use, because the structure of the 凸 rod is more force-bearing and durable than the L rod. Similarly, the door panel can be installed in the L convex structure for flipping display by installing the angle code on the door panel.